Heat Pump Wise

Air Source Heat Pump Installers in Richmond upon Thames

MCS certified installers covering Richmond upon Thames and surrounding areas. Up to £7,500 Boiler Upgrade Scheme grant for eligible homes.

Free quotesNo obligationMCS certified installersPrivacy protected

Homes in Richmond upon Thames range from older terraces to larger detached properties, so heat pump suitability can vary street by street. The right system depends on insulation, heat loss, radiators and the heating system being replaced.

Quick answer

Is an air source heat pump suitable in Richmond upon Thames?

Often, yes, but it depends on the property. Homes with decent insulation, suitable radiator sizes and space for an outdoor unit are usually better candidates. An MCS installer should confirm this with a home survey before quoting.

Cost and grant snapshot for Richmond upon Thames

Typical installed cost

£8,177 - £11,776

Before any grant

Grant available

Up to £7,500

England & Wales

Local area guides

19

Around Richmond upon Thames

These are broad estimates based on local housing mix. Final cost depends on heat loss, radiator upgrades, cylinder work, pipework and installer survey findings.

Get free air source heat pump quotes in Richmond upon Thames

Free quotes from MCS certified installers, with grant options checked at survey. No obligation.

Check My Eligibility

What local housing means for heat pump quotes

Richmond upon Thames has 81,511 households, with flats making up around 34% of homes in the areas we map. Property type matters because larger or less insulated homes usually need more heat output, larger radiators or extra cylinder work.

  • Older homes may need insulation or radiator improvements before the heat pump runs efficiently.
  • Terraces and flats can have tighter outdoor unit siting constraints.
  • Detached and larger homes often need a bigger system and more detailed heat loss checks.
  • Homes replacing oil, LPG, electric or solid fuel may see a stronger running-cost case than modern mains gas.

How to compare installers in Richmond upon Thames

A useful quote should do more than give one headline price. When comparing MCS certified installers covering Richmond upon Thames, look for the details that affect comfort, running cost and grant eligibility.

  • A room-by-room heat loss calculation and clear system size.
  • Radiator, hot water cylinder and pipework recommendations.
  • Outdoor unit siting, access, noise and planning checks where relevant.
  • Boiler Upgrade Scheme eligibility checked at survey and shown clearly on the quote.

Local areas covered around Richmond upon Thames

See more specific air source heat pump guidance for nearby neighbourhoods

1

Barnes

Area guide
2

East Sheen

Area guide
3

Fulwell & Hampton Hill

Area guide
4

Ham, Petersham & Richmond Riverside

Area guide
5

Hampton

Area guide
6

Hampton North

Area guide
7

Hampton Wick & South Teddington

Area guide
8

Hanworth Village

Area guide
9

Heathfield

Area guide
10

Kew

Area guide
11

Mortlake & Barnes Common

Area guide
12

North Richmond

Area guide
13

South Richmond

Area guide
14

South Twickenham

Area guide
15

St Margarets & North Twickenham

Area guide
16

Teddington

Area guide
17

Twickenham Riverside

Area guide
18

West Twickenham

Area guide
19

Whitton

Area guide

What a good installer survey should check

The survey is where a generic estimate becomes useful. Before you compare quotes in Richmond upon Thames, make sure each installer explains these points clearly.

Heat loss

The system size your home actually needs

Radiators & pipework

Any upgrades needed for efficient low-temperature heating

Cylinder & controls

Hot water, thermostat and smart control requirements

Grant eligibility

Whether the Boiler Upgrade Scheme could apply

Useful air source heat pump guides

Common questions about air source heat pumps in Richmond upon Thames

Can I get air source heat pump quotes in Richmond upon Thames?

Yes. Heat Pump Wise can match homeowners in Richmond upon Thames with local MCS certified installers who provide air source heat pump quotes and survey advice.

Can I use the £7,500 grant in Richmond upon Thames?

Eligible homeowners in England and Wales can get up to £7,500 towards an air source heat pump through the Boiler Upgrade Scheme. Your installer confirms eligibility and applies the grant through the official scheme.

Which areas near Richmond upon Thames are covered?

Coverage depends on installer availability, but the areas listed below are part of our local air source heat pump guide network for Richmond upon Thames and nearby neighbourhoods.

Get free air source heat pump quotes in Richmond upon Thames

Free quotes from MCS certified installers, with grant options checked at survey. No obligation.

Check My Eligibility

Population data from Census 2021. Grant amounts and eligibility are set by the relevant government scheme and confirmed at survey. Price and saving guides indicative.

Free Heat Pump Quotes