Heat Pump Wise

Air Source Heat Pump Installers in M44

Salford

Property data: Census 2021 · 8,572 households

Free quotesNo obligationMCS certified installersPrivacy protected

M44 has a high share of semi-detached homes, which can make outdoor unit siting, permissions and cylinder space more important than a standard heat pump quote.

Quick answer

Can you install an air source heat pump in M44?

Often, yes, but flats, conversions and tighter plots need more careful checks. An installer should confirm outdoor unit location, permission requirements, heat loss and hot water setup before giving a firm quote.

Cost and grant snapshot for M44

Typical installed cost

£8,945 - £12,875

Before any grant

Grant available

Up to £7,500

England & Wales

Semi-detached homes

51%

Radiator checks matter

These are broad estimates based on postcode housing mix. Final price depends on heat loss, radiator upgrades, cylinder work, property access and grant eligibility.

Get free air source heat pump quotes in M44

Free quotes from MCS certified installers, with grant options checked at survey. No obligation.

Check My Eligibility

Property types in M44

Source: Census 2021 · 8,572 households

Detached 13%Semi-detached 51%Terraced 26%Flats 11%

Semi-detached homes make up around 51% of homes in M44. Property type matters because it affects heat loss, outdoor unit siting, radiator upgrades and whether permissions may be needed.

What installers check in M44

A local survey turns the postcode estimate into something useful. Before comparing quotes, make sure each installer explains these points clearly.

  • Current heating fuel and whether it is eligible for grant replacement.
  • Insulation, glazing and overall heat loss.
  • Radiator sizes, pipework and whether a hot water cylinder is needed.
  • Outdoor space, access and the best place for the heat pump unit.

Extra checks for flats, terraces and conversions

  • Flats and leasehold homes may need freeholder or management company permission.
  • Upper-floor flats need careful outdoor unit siting and pipe route checks.
  • Terraced homes may have fewer siting options, especially without rear access.
  • Converted properties can vary a lot, so heat loss and hot water storage need checking.

Common questions about heat pumps in M44

How much does an air source heat pump cost in M44?

In M44, an air source heat pump typically costs between £8,945 and £12,875 installed before any grant. The £7,500 Boiler Upgrade Scheme may reduce the price for eligible homes, but the final figure depends on heat loss, radiators, cylinder work, access and installer survey findings.

Which installers cover M44?

Our network includes MCS certified air source heat pump installers covering M44 and the wider Salford area. After you submit a quote request, we match you with local companies who can survey your property and advise on grant options.

Are flats in M44 suitable for air source heat pumps?

Some flats can be suitable, but they need more checks than a typical house. The installer should look at outdoor unit siting, leasehold or freeholder permission, hot water storage, noise rules and pipe routes before quoting.

How long does installation take?

Most air source heat pump installations in M44 take between 2 and 4 days depending on radiator and cylinder work and property access. Your installer will give a firm timeline during the free home survey.

Get free air source heat pump quotes in M44

Free quotes from MCS certified installers, with grant options checked at survey. No obligation.

Check My Eligibility

More heat pump guides for M44

Cost estimates are indicative and depend on heat loss, radiators, cylinder and install complexity. Grant amounts and eligibility are set by the relevant government scheme and confirmed at survey. Property mix from Census 2021.

Free Heat Pump Quotes