Heat Pump Wise

Air Source Heat Pump Installers in W13

Ealing

Property data: Census 2021 · 18,645 households

Free quotesNo obligationMCS certified installersPrivacy protected

W13 has a high share of flats, which can make outdoor unit siting, permissions and cylinder space more important than a standard heat pump quote.

Quick answer

Can you install an air source heat pump in W13?

Often, yes, but flats, conversions and tighter plots need more careful checks. An installer should confirm outdoor unit location, permission requirements, heat loss and hot water setup before giving a firm quote.

Cost and grant snapshot for W13

Typical installed cost

£7,585 - £10,915

Before any grant

Grant available

Up to £7,500

England & Wales

Flats in area

53%

Permission and unit siting matter

These are broad estimates based on postcode housing mix. Final price depends on heat loss, radiator upgrades, cylinder work, property access and grant eligibility.

Get free air source heat pump quotes in W13

Free quotes from MCS certified installers, with grant options checked at survey. No obligation.

Check My Eligibility

Property types in W13

Source: Census 2021 · 18,645 households

Detached 5%Semi-detached 18%Terraced 24%Flats 53%

Flats make up around 53% of homes in W13. Property type matters because it affects heat loss, outdoor unit siting, radiator upgrades and whether permissions may be needed.

What installers check in W13

A local survey turns the postcode estimate into something useful. Before comparing quotes, make sure each installer explains these points clearly.

  • Current heating fuel and whether it is eligible for grant replacement.
  • Insulation, glazing and overall heat loss.
  • Radiator sizes, pipework and whether a hot water cylinder is needed.
  • Outdoor space, access and the best place for the heat pump unit.

Extra checks for flats, terraces and conversions

  • Flats and leasehold homes may need freeholder or management company permission.
  • Upper-floor flats need careful outdoor unit siting and pipe route checks.
  • Terraced homes may have fewer siting options, especially without rear access.
  • Converted properties can vary a lot, so heat loss and hot water storage need checking.

Common questions about heat pumps in W13

How much does an air source heat pump cost in W13?

In W13, an air source heat pump typically costs between £7,585 and £10,915 installed before any grant. The £7,500 Boiler Upgrade Scheme may reduce the price for eligible homes, but the final figure depends on heat loss, radiators, cylinder work, access and installer survey findings.

Which installers cover W13?

Our network includes MCS certified air source heat pump installers covering W13 and the wider Ealing area. After you submit a quote request, we match you with local companies who can survey your property and advise on grant options.

Are flats in W13 suitable for air source heat pumps?

Some flats can be suitable, but they need more checks than a typical house. The installer should look at outdoor unit siting, leasehold or freeholder permission, hot water storage, noise rules and pipe routes before quoting.

How long does installation take?

Most air source heat pump installations in W13 take between 2 and 4 days depending on radiator and cylinder work and property access. Your installer will give a firm timeline during the free home survey.

Get free air source heat pump quotes in W13

Free quotes from MCS certified installers, with grant options checked at survey. No obligation.

Check My Eligibility

More heat pump guides for W13

Cost estimates are indicative and depend on heat loss, radiators, cylinder and install complexity. Grant amounts and eligibility are set by the relevant government scheme and confirmed at survey. Property mix from Census 2021.

Free Heat Pump Quotes